- per page
- HPE X361 150W AC Power Supply
- HP 5100 1-port 10GbE XFP Module
- Model : HP 5120-48G EI Switch
- P/N : JE067A
- Layer : Lite Layer 3
- Port : 44 Port 10/100/1000
- GBIC or SFP slot : 4 Port Dual-Personality
- Dual port (Gig or SFP) : 96/71
- Capacity (Gbps)/ : -
- Throughput (Mbps) : -
- Mac Address : 16000
- VLAN : 4000
- Others : -
- Warranty : Lifetime
- Ports 24 x 10/100/1000 (PoE+) + 2 x 10 Gigabit Ethernet SFP+ / 1 Gigabit Ethernet SFP+ + 2 x 10 Gigabit Ethernet
- Power Over Ethernet (PoE) PoE+
- PoE Budget 370 W
- Performance Throughput: 96 Mpps
- Routing/switching capacity: 128 Gbps
- Capacity MSTP instances: up to 64
- Simultaneous VLANs: 4094
- IPv4 routing table entries: 512
- IPv6 routing table entries: 256
- MAC Address Table Size 16384 entries
- Jumbo Frame Support 9KB
- Routing Protocol RIP-1, RIP-2, IGMP, static IPv4 routing, static IPv6 routing
- Remote Management Protocol SNMP 1, RMON, Telnet, SNMP 3, SNMP 2c, HTTPS, TFTP, SSH-2, SCP
- Encryption Algorithm SSL
- Authentication Method Secure Shell (SSH), RADIUS, TACACS, TACACS+, Secure Shell v.2 (SSH2), HWTACACS
• 24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/ 100BASE-TX: half or full; 1000BASE-T: full only
• 2 SFP+ fixed 1000/10000 SFP+ ports
• 2 RJ-45 1/10GBASE-T ports
Additional ports and slots
• 1 RJ-45 Serial Console Port
Physical characteristics
• Dimensions : 17.32(w) x 6.3(d) x 1.72(h) in. (44 x 16 x 4.37 cm) (1U height)
• Weight : 6.61 lb (3 kg)
Memory and processor
• 1 GB SDRAM; Packet buffer size: 1.5 MB, 512 MB flash
Performance
• 1000 Mb Latency : < 5 µs
• 10 Gbps Latency : < 3 µs
• Throughput : up to 96 Mpps
• Routing/Switching capacity : 128 Gbps
• Routing table size : 512 entries (IPv4), 256 entries (IPv6)
• MAC address table size : 16384 entries IPv6 Ready Certified
Electrical characteristics
• Frequency : 50/60 Hz
• Maximum heat dissipation : 68/116 BTU/hr (71.74/122.38 kJ/hr), for AC power
• AC voltage : 100–240 VAC
• Current : 2 A
• Maximum power rating : 34 W
• Idle power : 20 W
- 24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T,
- IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T);
- Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
- 4 SFP+ fixed 1000/10000 SFP+ ports
- Additional ports and slots
- 1 RJ-45 serial console port
- 24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T,
- IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T);
- Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
- 4 SFP+ fixed 1000/10000 SFP+ ports
- Additional ports and slots
- 1 RJ-45 serial console port
- Specifications
- Differentiator
- Layer 3 switch with 24 10/100/1000 PoE+ ports
- 4 SFP+ and 1 expansion module slots. Supports Intelligent Resilient Framework (IRF) virtual fabric and dual power supplies.
- Ports
- (24) RJ-45 autosensing 10/100/1000 PoE+ ports
- Ports 1 - 8 support MACSec
- (4) SFP+ 10GbE ports
- (1) port expansion module slot
- Supports a maximum of 6 SFP+ ports or 2 1/10GBASE-T ports, with optional module
- Memory and processor
- 2 GB SDRAM
- Packet buffer size: 4 MB
- 512 MB flash
- Latency
- 1000 Mb Latency: < 5 µs
- 10 Gbps Latency: < 3 µs
- Throughput
- up to 154.8 Mpps
- Routing/switching capacity
- 168 Gbps
- PoE capability
- 740 W PoE+
- Stacking capabilities
- IRF
- 9 switches
- Management features
- IMC - Intelligent Management Center
- Command-line interface
- Web browser
- SNMP manager
- DEVICE TYPE : SWITCH - 48 PORTS - L3 - MANAGED - STACKABLE
- ENCLOSURE TYPE : RACK-MOUNTABLE - 1U
- SUBTYPE : GIGABIT ETHERNET
- PORTS : 48 X 10/100/1000 (POE+) + 2 X 10 GIGABIT ETHERNET SFP+ / 1 GIGABIT ETHERNET SFP+ + 2 X 10 GIGABIT ETHERNET
- POWER OVER ETHERNET (POE) : POE+
- POE BUDGET : 370 W
- PERFORMANCE : THROUGHPUT : UP TO 130.9 MPPS ¦ ROUTING/SWITCHING CAPACITY : 176 GBPS
- CAPACITY : MSTP INSTANCES : UP TO 64 ¦ SIMULTANEOUS VLANS : 4094 ¦ IPV4 ROUTING TABLE ENTRIES : 512 ¦ IPV6 ROUTING TABLE ENTRIES : 256
- MAC ADDRESS TABLE SIZE : 16384 ENTRIES
- JUMBO FRAME SUPPORT : 9KB
- ROUTING PROTOCOL : RIP-1, RIP-2, IGMP, STATIC IPV4 ROUTING, STATIC IPV6 ROUTING
- REMOTE MANAGEMENT PROTOCOL : SNMP 1, RMON, TELNET, SNMP 3, SNMP 2C, HTTPS, TFTP, SSH-2, SCP
- ENCRYPTION ALGORITHM : SSL
- RAM : 1 GB - SDRAM
- Specifications
- Differentiator
- Layer 3 switch with 24 10/100/1000 ports
- 4 SFP+ and 1 expansion module slots. Supports Intelligent Resilient Framework (IRF) virtual fabric and dual power supplies.
- Ports
- (24) RJ-45 autosensing 10/100/1000 ports
- Ports 1 - 8 support MACSec
- (4) SFP+ 10GbE ports
- (1) port expansion module slot
- Supports a maximum of 6 SFP+ ports or 2 1/10GBASE-T ports, with optional module
- Memory and processor
- 2 GB SDRAM
- Packet buffer size: 4 MB
- 512 MB flash
- Latency
- 1000 Mb Latency: < 5 µs
- 10 Gbps Latency: < 3 µs
- Throughput
- up to 154.8 Mpps
- Routing/switching capacity
- 168 Gbps
- Stacking capabilities
- IRF
- 9 switches
- Management features
- IMC - Intelligent Management Center
- Command-line interface
- Web browser
- SNMP manager
- per page